Productos
- Sealing of joints
- Cementitious Adhesive
- Extra layers of Mortar
- Repairing, anchoring and self-levelling Mortars
- Waterproofing of Bathrooms
- Expansion joints and hydro expansion Joints
- Adhesive or waterproofed Latex
- Special Adhesives
- Waterproofing Products
- Industrial Paints
- Acoustic Insulation
- Mesh and Geotextiles
- Surface treatments
- Cleaning Products and Acids
- Accesories
Swimming pools
The worst fate for a cementitious adhesive is to be in continuous contact with water. Fixcer is a great specialist in products aimed at swimming pools. The best advice: follow all the recommended steps.
The sealing of a pool begins with the construction of the concrete structure. It continues with waterproofing and laying the tiles, and finishes with making the joints resistant to the chemical products of the pool. EVERYTHING is important.
| 1st step: hydro-expansive joint for the construction phase of the concrete cell, in the wall-plinth union | Fuga-Stop 25x18 mm. |
| 2nd step: creating a union bridge between mortar fillings and concrete substrate: PRIMFIX + portland (1:1) | Primfix |
| 3th step: making the wall stuccos on concrete substrate | Fix-Revoco |
| 4th step: filling the base on concrete substrate | Recrecem Pre-Mix |
| 5th step: swimming-pool sealing applied on top of mortar fillings | Hidroelastic |
| 6th step: laying ceramic tiles in swimming-pools on HIDROELASTIC | Tecnocol Flex |
| SEALING (recommended) | Juntatec |
| EXPANSION JOINTS | Sellalastic |